EDB - Ethernet Digital I/O Board  (Ether I/O 24)

24 Channels of Digital I/O on Ethernet Networks

The EDB board (Elexol Ether I/O 24 R) is a versatile platform for controlling external circuits and devices through an Ethernet network. The board provides 24 individually programmable I/O channels for digital I/O, and is capable of wireless operation with a wireless network router. It comes complete with a host interface application program and a full Windows API (Application Program Interface) for programming in VB or VC++.

 

The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device A number of accessory products from Unistep are specifically designed to work with the EDB board and enhance its capabilities. Unique MAC address assigned to each board makes it possible to have multiple boards on the same network.

 

More Info  |  Accessories

 

EDB Board (Ether I/O 24 R) . . . . . . . . . EDB-AB-010     $114.90 USD 

 EDM - Ethernet Digital I/O Module  (Ether I/O 24 DIP)

Development module for 24-Channel digital I/O on Ethernet networks.

 

The EDM (Elexol P/N Ether I/O 24 DIP) is an integrated, micro-controller based network interface board with 24 digital user I/O lines. The module’s firmware and hardware enable your devices or other modules to be connected to a generic Ethernet network and controlled using a command sent over the network via UDP.

 

Each of the 24 User I/O lines operates at 5V DC maximum levels and can be independently programmed as an input whose state can be remotely sensed via another network device, an input whose state is internally checked and transmitted when a change occurs, or an output whose state can be remotely controlled by another networked device.

The outputs of the module are able to source or sink up to 30mA per I/O, up to a maximum 50mA per port, to allow for direct connection to a variety of external devices

 

More Info  |  Accessory Boards

 

EDM Development Module (Ether I/O 24 DIP). . . .  EDM-DM-010    $112.90 USD 

 ESD - Ethernet Serial Device Server

Ethernet connectivity for legacy serial devices.

 

The LS100 is a low-cost wired serial device servers that connects RS-232 based serial devices to the 10-Base-T Ethernet Network. It is a cost-effective solution for connecting legacy serial devices (like printers, etc.) to the Ethernet Network.

 

ESD Module is also a good teaching tool in the data communication and computer interfacing course labs, as it is widely-used in the industry and covers many fundamental aspects of networking. The board comes with com port redirectors to support the application running on the computer.

 

Features:

• Connects legacy serial devices to 10Base-T Ethernet.
• Supports RS232 based serial devices via DB9 serial port.
• Serial data transfer rate up to 115Kbps.
• Reliable TCP/IP protocol stack.
• Low-price model for lowest transition cost.
• Configuration via telnet or serial port.
• Management software for configuration and administration.

Data Sheet  |  User Manual

 

ESD Ethernet Serial Device Server Board  . . . . . . . . ESD-AB-010  $64.80 USD 

ESD Ethernet Serial Device Server Lab Module . . . . ESD-LM-010  $86.80 USD