UNISTEP TECHNOLOGIES
Building tomorrow's careers in Electronics and Computer Control... One step at-a-time.
  
Home      Educational Products      All Educational
Print this pageAdd to Favorite
  

 ACS - Asynchronous Communication Set

Asynchronous Communication Set complete with a transmitter and a receiver
 
The ACS set is made up of two LabMaster Async communication modules UAT (Universal Asynchronous Transmitter) & UAR (Universal Asynchronous Receiver) mounted on a single 0.25” clear acrylic chassis with a common power supply connection via two binding posts.
 
Serial communication experiments using TTL-level NRZ signals, RS-232 signals, and Infrared signals through Fiber Optic cables can be carried out without requiring any additional equipment. Wireless Infrared and wireless RF transmissions can also be used for experimentation with additional LabMaster modules and lab kits.
 
Dimensions: 9.0”x4.0”x2.0”, including the non-slip rubber feet.
 
 
ACS Lab Set . . . . . . . . . . . . . . . . . . . . . . . . . . ACS-LM-010    $140.00 USD 
ACS Lab Set with Fiber-Optic Link Option . . . . ACS-FM-010    $176.70 USD 
 
 

 AIO - Analog I/O Board

Eight (8) ADC and two (2) DAC channels for the UCP and IRP Modules.
 
The Analog I/O Board is an accessory board that provides an analog interface to the USB and Ethernet/Internet Digital Control Boards (UCP and IRP, respectively). The board consists of an 8 channel 10 bit Analog to Digital Converter (MCP3008) and a 12 bit Digital to Analog Converter with 2 buffered outputs (MCP4922). Communication to the A/D and D/A Converters is via the SPI interface of the I/O 24 module which is already implemented in the firmware.
 
The 8 channels of the A/D, 2 channels outputs of the D/A, and all the VREF voltages are brought to screw-type terminal blocks for easy access. These terminal blocks will accept cables 0.5 – 2mm thick. The connection between the I/O24 module and the Analog I/O board is via an IDC link cable supplied with the board.
 
 
AIO Lab Module . . . . . .   AIO-LM-010    $51.20 USD 
AIO Board Only . . . . . . .  AIO-AB-010    $39.50 USD 

 CLB - Connector / LED Board

Terminal expansion board for the UDB and EDB boards
 
This board is designed to facilitate easy connection of thicker wires to the I/O module or to provide a buffered visual indication of the states of signals on one of the 8-bit ports. This board can also be used as a status indicator board at a remote location by a control application. The driver circuit and the indicators are powered from the 5V supply on the I/O board.
 
CLB Lab Module  . . . . . .  CLB-LM-010      $38.50 USD 
CLB Board Only . . . . . . .  CLB-AB-010      $27.80 USD 
 

 DFS - Digital Frequency Synthesizer

A complete digital frequency synthesizer for experimentation in the 1 MHz - 20 MHz frequency band.
 
A Short-Wave HF synthesizer circuit is at the heart of the DFS module. The circuit is built around a VFO section controlled by a crystal oscillator, a pre-scaling divider, and a PLL circuit. This circuit is fundamentally very similar to the ones used in all present-day frequency-synthesized receivers and transmitters with digital tuners. Actual Short-Wave broadcast frequencies between the 120m – 11m bands can all be synthesized with the DFS circuit.
 
DFS module is also available as a "Challenge" version where critical circuit parameters can be re-designed easily. Students can be assigned to redesign circuit to determine the values of passive components mounted on single-pin sockets that control key functional parameters. Background material needed for these design steps is provided in the user manual and the data sheets.
 
 
DFS Lab Module . . . . . . . . . . . .  DFS-LM-010    $118.40 USD 
DFS Challenge Lab Module . . . . DFS-CM-010    $137.20 USD 

 ECT - Experimentor Cable Tester

Twister-Pair patch cable tester
 
The ECT is a low-cost but very functional cable tester. It was designed as a no-frills tester kit that is suitable as a first-year project in soldering and construction techniques. The tester can be used to test Twisted-Pair patch cords for open or shorted wires, as well as identifying straight-thru and crossover configurations. Device requires 2 x AAA batteries to operate.
 
 
ECT Full Kit (Case, PCB, and components) . . . . . ECT-FK-010    $32.80 USD 

 EDB - Ethernet Digital I/O Board

24 Channels of Digital I/O on the Ethernet network.
 
The EDB Board is a remote Ethernet I/O port that can be controlled from anywhere on the Internet. It has a unique MAC address and can be assigned an IP address on the local network. It has 24 digital I/O lines where each port can be configured as input or output, and can be controlled and read individually.

The TCP/IP stack and the web server firmware included with the module supports the ARP, IP, ICMP, UDP, BOOTP and DHCP protocols. The 10 Base-T Ethernet interface has a built-in RJ-45 connector and status lamps to show link condition and activity. Utility software included with the module allows configuration of the IP address and other advanced configurable parameters.

Capabilities provided by the on-board circuitry, TCP/IP stack in the firmware, and the Windows programming API makes a rich, hands-on learning environment in networking, data communication, and digital control labs.
 
 
EDB Lab Module . . . . . . . . EDB-LM-010    $136.90 USD 

 EDM - Ethernet Digital I/O Module

50-Pin DIP Version of the EDB Board for 24 Channels of Digital I/O on the Ethernet network

The EDB Board is a remote Ethernet I/O port that can be controlled from anywhere on the Internet. It has a unique MAC address and can be assigned an IP address on the local network. It has 24 digital I/O lines where each port can be configured as input or output, and can be controlled and read individually.

The TCP/IP stack and the web server firmware included with the module supports the ARP, IP, ICMP, UDP, BOOTP and DHCP protocols. The 10 Base-T Ethernet interface has a built-in RJ-45 connector and status lamps to show link condition and activity. Utility software included with the module allows configuration of the IP address and other advanced configurable parameters.

Capabilities provided by the on-board circuitry, TCP/IP stack in the firmware, and the Windows programming API makes a rich, hands-on learning environment in networking, data communication, and digital control labs.
 
 
EDM Development Module . . . . . . .  EDM-DM-010    $112.90 USD 
 

 ESD - Ethernet Serial Device Server

 
Ethernet connectivity for legacy serial devices.
 
The LS100 is a low-cost wired serial device servers that connects RS-232 based serial devices to the 10-Base-T Ethernet Network. It is a cost-effective solution for connecting legacy serial devices (like printers, etc.) to the Ethernet Network.
 
ESD Module is also a good teaching tool in the data communication and computer interfacing course labs, as it is widely-used in the industry and covers many fundamental aspects of networking. The board comes with com port redirectors to support the application running on the computer.
 
Features:
  • Connects legacy serial devices to 10Base-T Ethernet.
  • Supports RS232 based serial devices via DB9 serial port.
  • Serial data transfer rate up to 115Kbps.
  • Reliable TCP/IP protocol stack.
  • Low-price model for lowest transition cost.
  • Configuration via telnet or serial port.
  • Management software for configuration and administration.
 
ESD Ethernet Serial Device Server Board  . . . . . . . . ESD-AB-010  $64.80 USD 
ESD Ethernet Serial Device Server Lab Module . . . . ESD-LM-010  $86.80 USD 
 

 FSP - Computer-Controlled Frequency Synthesizer

Digital frequency synthesis from 5 MHz to 20 MHz using a PC application and a USB I/O board.
 
FSP Module has been designed to facilitate computer-controlled frequency synthesis experimentation in the Digital Control lab or frequency-hopping experiments in the Communication Circuits lab. At the heart of the module is a HF frequency synthesizer circuit capable of synthesizing actual short-wave broadcast frequencies between the 120m – 11m bands. The circuit is built around a VFO coupled to a digital PLL circuit. A prescaled crystal oscillator and a divide-by-n circuit acting on the VCO output provide the input to the PLL circuit to complete the synthesis loop. This circuit is fundamentally very similar to the ones used in all present-day frequency synthesized receivers and transmitters with digital tuners. An application program running on the PC, along with a suitable digital output port, provides the digital input to set the frequency.
 
The FSP Control Panel application that comes with the board provides testing, demonstration and basic experimentation features. For single-frequency operation, one synthesized frequency can be set using the Control Panel. For frequency-hopping applications, basic FHSS operation parameters (Channels, Hop Set, Hop Sequence, and Hop Rate) can be set within the  5 MHz– 20 MHz range.

 
FSP Lab Module with Control Panel Software . . . . . . . . . . . FSP-LM-010    $139.10 USD 
FSP Lab Challenge Module with Control Panel SOftware . .  FSP-CM-010    $159.10 USD  

 ICL - Infrared Communication Link

Full-Duplex Infrared modem with customizable operating parameters.
The ICL module is a full-duplex modem that can establish wireless asynchronous communication between two PC’s using infrared light beams. The circuit works with the existing PC serial ports and only requires an external DC power source and a serial cable to connect to the PC. On-board RS-232 transceiver circuit carries out the conversion of the RS-232 signals and makes the ICL circuit transparent to the application controlling the serial port.
 
The infrared link is established by FSK modulation of an IR LED and the reception by a PIN diode. Two separate pairs of frequencies are used to provide the full-duplex link.
 
The Challenge Module allows the FSK and PLL circuit sections to be redesigned for different operational parameters (transmit frequencies, frequency shift, capture range, etc.) by replacing the related passive components without requiring soldering/desoldering.
 
Software application provided with the board (ICL Control Panel) can be used to demonstrate basic async serial communication concepts, test the board, and allow the students to experiment with the system and the concepts.
 
 
ICL Lab Module . . . . . . . . . ICL-LM-010    $136.30 USD 
ICL Challenge Module . . . . ICL-CM-010    $158.30 USD 

 IOC - I/O Combo Board

I/O enhancement for UDB and EDB boards with relay outputs and isolated digital inputs.

The board contains 4 Relay Outputs and 4 optically isolated input channels. The relay outputs have both Normally Open (N/O) and Normally Closed (N/C) contacts rated to 250V AC or 30V DC, both at 5 Amps. The relays’ coils are powered by an external 12VDC power supply that is capable of producing approx 350mA (about 80mA is required per active relay). The power supply is not provided with the board, but the Lab Module (‘LM’) version of the board has binding posts in addition to the  a 3.5 mm DC plug for easy supplying of the 12 V external power. The relay coils are controlled using the on-board ULN2003 driver via the I/O ports of the board. Each of the output port channels has an LED to indicate the relay output status.

The input channels are bridged wet contacts which are electrically isolated from all other channels and the I/O24 module. Each input channel also has a LED to indicate when a signal is present on the channel.
 
IOC Lab Module . . . . . .  IOC-LM-010    $68.90 USD 
IOC Board Only  . . . . . .  IOC-AB-010    $46.90 USD 

 LPR - Logic Probe

Logic Probe: One essential tool for working with digital circuits
 
This kit is a full-featured logic probe that will be indispensable for any kind of digital analysis or debugging work on a digital circuit. It has the following features:
 
    -  Selection of TTL or CMOS input levels
    -  Visual indication of HI and LO logic levels
    -  Audible indication of HI and LO logic levels
    -  Pulse extender to catch fast pulses that may not be visible on the LED indicators
    -  Reverse polarity protection
    -  5 V DC power requirement
 
LPR Kit (PCB and components, no case) . . . . . LPR-PK-010    $29.50 USD 

 OIB - Opto Input Board

Input enhancement for the UDB and EDB I/O boards with eight (8) optically isolated input channels.
 
8 optically isolated input channels to accept signals from 3-24V AC or DC. Each channel of the board is electrically isolated from all other channels and the I/O module, thereby providing isolated grounds to prevent incoming signals from interfering with each other or prevent damage the I/O module.
 
The board has a box header matching the connector of the I/O module. Each channel has an LED indicator to show the digital status.
 
OIB Lab Module . . . . . . . OIB-LM-010    $50.60 USD 
OIB Board Only  . . . . . . . OIB-AB-010    $38.60 USD 

 PLL - Phase-Locked Loop Module

Complete PLL system including crystal oscillator, pre-scaler, VCO, phase detector and divide-by-n circuit.
 
The PLL module is designed to function as a versatile platform that can be used to teach many aspects and applications of the basic PLL circuit. The module has an on-board reference oscillator, a pre-scaler, phase comparators, a VCO, a divide-by-n counter, a gated external input circuit, and a LP output filter. The complete circuit is fundamentally very similar to the ones used in all present-day frequency synthesized receivers and transmitters with digital tuners. Actual short-wave broadcast frequencies between the 120m – 11m bands can all be synthesized with the PLL circuit. With an external signal generator, PLL operation can be observed and analyzed in the entire 1 MHz - 20 MHZ band.
 
Board includes test points and configuration jumpers to reconfigure the circuit for different mode of operations and observe all relevant internal signals on the scope. The Challenge Module version allows redesigning the circuit for different operating parameters. The PLL design procedure supplied with the product can be used as a complete lab experiment where students can redesign the circuit, build it, and test the results in the lab. Level of the material (PLL Design and the User Manual) is suitable for both community colleges and universities. 
 
 
PLL Lab Module . . . . . . . . . . .  PLL-LM-010    $148.50 USD 
PLL Challenge Lab Module . . . PLL-CM-010    $168.50 USD 

 PPE - PIC Programmer and Experiment Board

A board for programming and experimentation with Microchip® FLASH PIC(tm) microcontrollers.
  • Supports 4 different 300 mil. PICs: 8p, 14p, 18p and 28p
  • Test buttons and LED indicators to carry out educational experiments, like with the enclosed programming examples
  • Easily connectable to a PC through the serial port or USB using the SUA Serial-to-USB Adapter.
  • Enclosed is a Flash Microcontroller (PIC16F627) that can be reprogrammed up to 1000 times for experimenting at will
  • Software to compile and program your source code is included
  • power requirements: 12 - 15V DC @ min. 300mA
  • Dimensions: 5.8" x 4.0"
  • Also available as a kit (PPE-FK-010)
More Info  |  User Manual
 
PPE Lab Module with Software CD . . . . . . .  PPE-LM-010    $99.50 USD 
PPE Kit with Software CD . . . . . . . . . . . . . .  PPE-FK-010    $55.00 USD 
PPE Assembled Board with Software CD . .   PPE-AB-010    $77.50 USD 

 PSB - Push-Button / Slide Switch Board

Input enhancement for the UDB and EDB I/O boards with push-button and slide switches.
 
This board is intended as a convenient input signal generation circuit to facilitate testing, debugging and troubleshooting while developing applications or other control devices. The board features 8 miniature tactile push-button switches and 8 slide switches.
Each of the 8 input channels has an indicator LED to show that the board is powered and the push-button switch or the slide switch is activated.
 
PSB Lab Module . . . . . . .  PSB-LM-010    $49.40 USD 
PSB Board Only  . . . . . . .  PSB-AB-010    $37.40 USD 

 ROB - Relay Output Board

Output power enhancement for the UDB and EDB boards through eight (8) relay outputs.
 
8 relays with both N/O and N/C contacts rated to 250V AC or DC at 5 Amps. It is possible to drive a multitude of devices with these versatile relays. Each of the 8 relays on the board has a matching LED to indicate its state.
 
The relay coils are powered from an external 12V DC source but are individually controlled by the buffered control signals from the I/O module. External power can be applied either through the binding posts from a lab supply or through the DC power connector from an AC/DC wall adapter.
 
ROB Lab Module . . . . . . . ROB-LM-010    $81.80 USD 
ROB Board Only  . . . . . . . ROB-AB-010    $59.80 USD 

 SPI - Serial Port Control Interface

Control interface for experimentation with digital I/O, DC motor control, DC power control, stepper motor control and analog inputs.
 
SPI module is a general-purpose I/O platform designed to support a wide range of digital control experiments in the electronics lab. It provides various control ports to the host PC through a serial port (or a USB port using the SUA Serial-to-USB adapter). These control ports include digital outputs, digital inputs, analog inputs, analog reference voltage input, PWM outputs and stepper motor control outputs.
 
The SPI Control Panel (a Windows program running on the PC) provides direct control of the output channels and display of input channels, and thus facilitates control experimentation without any programming. For experiments and projects that require programming, the advantage of using the serial ports on the PC is that for most program development environments (like Visual Basic, Visual C, etc.) no additional software is needed to use the serial ports. The MPU on-board the SPI interprets commands from the host PC to carry out complex operations using all I/O features.
 
More Info |  User Manual  |  Circuit  |  SPI C/P Screen Shot 
 
SPI Lab Module . . . . . . . SPI-LM-010    $120.30 USD 

 SUA - Serial USB Adapter

USB to Serial Convert Cable(DB9M/USB B female converter and USB A/B cable) 
 
The USB to serial adapter provides an external plug and play RS-232 serial connection with your computer, let you free up Yours Existing serial port. Users have the capability to utilize the adapter with serial port interface in an easy to use environment. The adapter is designed for connections to cellular phone. PDAs, Digital cameras, Modems, or ISDN terminal adapters through your USB port with up to 230kbps data transfer rate.

Features:
- Supports automatic handshake mode.
- Works with cellular phones, PDA, Digital cameras, Modems, and ISDN terminal adapters.
- Supports Windows 98SE/Me/2000/XP32, 64/Vista32, 64, Windows 7 (32 and 64)
- Supports remote wake-up and power management
- Frees your RS-232 ports for other uses
- Comes with 42 inch A to B USB cable.
 
SUA Adapter and Driver CD . . . . . .  SUA-FP-010    $16.90 USD 
▲ Top of Page

 TCT - Twisted-Pair Cable Tester

MSI Logic IC building blocks at work
 
The TCT Lab Module is a cable tester that has been designed to function as a tool for teaching and demonstrating combinational logic circuits. It is built using some common but fundamental MSI logic ICs. The circuit includes oscillators, counters, flip-flops, buffer drivers, XOR gates, OR gates, LEDs and a buzzer. Analysis of the design and operation of the circuit should give the students a very good, solid hands-on experience in using and designing with these basic logic building blocks.

TCT circuit can detect opens, shorts, crossed wires, and crossed pairs. A counter driver applies all 8-bit combinations to the cable and compares the input with the output. The counting is stopped if a problem is detected, and the wire in question is indicated on a separate set of LED indicators. A buzzer also provides audible alert when a fault is detected.

Three connector sockets for the RJ45 cables accommodate both straight thru and crossed patch cables.
 
 
TCT Lab Module (with base plate, rubber feet, and binding posts) . .  TCT-LM-010    $75.50 USD 
TCT PCB Kit  (parts and the circuit board)  . . . . . . . . . . . . . . . . . . . . .  TCT-PK-010    $53.50 USD 
 

 UAR - Universal Asynchronous Receiver

A complete standalone asynchronous RS232 receiver
UAR module is based on a circuit built around our EDUART (EDucational UART) chip, a serial communications processor designed specifically for the learning environments. This processor supports unique features for effective learning, yet it can be fully configured by external DIP switches, without requiring a microcontroller or a PC for setup and operation.

In its normal mode of operation, the UAT circuit accepts asynchronous serial data in NRZ or RS232 formats at its input port and produces 8-bit clocked parallel data at its output port.

  • Internal generator for 300, 600, 1200, 2400, 4800, 9600, 19200, and 57600-BAUD rates.
  • Parity enable/disable and other async serial transmission parameters
  • Frame Error and Parity Error indicator LED lamps
  • Data bit LED lamps at the parallel output port.
 
UAR Lab Module . . . . . . . . . . . . . . . . . . . . . . . . UAR-LM-010    $73.70 USD 
UAR Lab Module with Fiber Optic Option . . . . . .UAR-FM-010    $85.00 USD 

 UAT - Universal Asynchronous Transmitter

A complete standalone asynchronous RS232 transmitter

    UAT module is based on a circuit built around our EDUART (EDucational UART) chip, a serial communications processor designed specifically for the learning environments. This processor supports unique features for effective learning, yet it can be fully configured by external DIP switches, without requiring a microcontroller or PC for setup and operation.

    In its normal mode of operation, the UAT circuit accepts 8-bit clocked parallel data at its input port and and produces asynchronous serial data in NRZ and RS232 formats at its output port.

    • Generator for 300,600,1200,2400,4800,9600,19200, and 57600-BAUD rates.
    • 8-bit character operation with 1 stop bit and odd/even parity
    • Count, character repeat and auto text transmit modes for troubleshooting
    • Oscilloscope trigger output for observing Async transmission frames
    • DIP switches and LED data indicators to set the parallel input data
    • On-board EIA-232 signal converter and driver for communicating with a PC

More Info 

UAT Lab Module . . . . . . . . . . . . . . . . . . . . . . . . UAT-LM-010    $73.70 USD 
UAT Lab Module with Fiber Optic Option . . . . .  UAT-FM-010    $85.00 USD 
Fiber-Optic Link Cable . . . . . . . . . . . . . . . . . . .  FOL-05-001    $13.10 USD 

 UDB - USB Digital I/O Board

24 Channels of Digital I/O on the USB Bus.
 
The UDB Lab Module is a versatile platform for carrying out lab experiments involving digital control of external circuits and devices through the USB network. The board provides 24 individually programmable digital I/O channels for digital I/O, and is capable of fast USB transfers. It comes complete with a control and test application program and a full Windows API (Application Program Interface) for programming in VB or VC++.

The Lab Module has been designed as a teaching tool through the use of other expansion/enhancement boards for I/O control experiments and projects. These accessory boards from Unistep are designed to work with the UDB and the EDB modules to provide additional I/O and experimentation capabilities like analog I/O, optically-coupled inputs, relay outputs, etc. The board and the host API can accommodate multiple boards on the same host computer.

 
UDB Lab Module . . . . . . .  UDB-LM-010    $94.30 USD 

 UDF - USB Dual Channel UART/FIFO Module

Development module for painless USB-UART functionality
 
The USBMOD5 is a integrated module based on the FTDI FT2232C Dual Channel USB UART / FIFO IC. The module features two Multi-purpose UART/FIFO controllers that can be configured in several different modes depending on the application.
 
 
UDF Development Module . . . . . . .  UDF-DM-010    $39.80 USD 

 UDM - USB Digital I/O Module

50-Pin DIP version of the UDB board for 24 Channels of Digital I/O on the USB Bus
The UDM Module provides 24 individually programmable digital I/O channels for digital I/O, and is capable of fast USB transfers. It comes complete with a control and test application program and a full Windows API (Application Program Interface) for programming in VB or VC++.

The USB firmware on the board and the host API can accommodate multiple boards on the same host computer.

 
UDM Development Module . . . . . . UDM-DM-010    $97.60 USD 

 ULN – ULN2803 Output Board

Output Power Enhancement with ULN2803 High Voltage-High Current Drivers for UDB and EDB
 
The I/O 24 ULN2803 Switch Board is an accessory board that allows higher voltage and current devices to be interfaced to the low level logic provided by the I/O24 modules USB and IRP. The board contains a ULN 2803 IC and LED indicators to show channel Status.
 
The ULN2803 includes 8-bit TTL-input NPN Darlington current sinks. Each driver can handle a maximum of 500mA continuous (when using a single channel only) and can withstand a maximum 50V in its off state. This makes the ULN2803 well suited to provide an interface between the low logic level interfaces and higher current/voltage devices such as relays, solenoids, motors and lamps.
 
ULN Lab Module . . . . . . . ULN-LM-010    $49.80 USD 
ULN Board Only  . . . . . . . ULN-AB-010    $27.80 USD 

 UEB - USB Experiment Interface Board

Digital and Analog I/O on the USB Bus  
 
The UEB module is an analog and digital I/O port that can be used to control external circuits and systems through the USB bus. The board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by connecting more (up to a maximum of four) cards to the PC's USB connectors.
 
All communication routines are contained in a Dynamic Link Library (DLL) supplied with the product. You may write custom Windows (98SE, 2000, Me, XP) applications in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows application development tool that supports calls to a DLL. Source code for Visual Basic, Delphi and Borland C++ Builder included.
 
 
UEB Lab Module with Software CD . . . . .  UEB-LM-010    $99.60 USD 
UEB Board Only with Software CD  . . . . .  UEB-AB-010    $79.40 USD 

 USC - Serial USB Adapter Cable

USB to Serial Convert Cable ( DB9M / USB A Male) - 3FT
 
The USB-to-Serial Converter Cable allows you to connect an RS232 serial device to your PC through the USB 2.0 port with up to 230 kbps data transfer rate. This 3 foot long cable has a DB9 male connector (serial) on one end and a USB A male connector on the other.

Features:
  • Uses the Prolific PL-2303 chipset
  • Supports automatic handshake mode
  • Works with cellular phones, PDAs, digital cameras, modems, and ISDN terminal adapters
  • Supports Windows 98/98SE/ME/2000/XP/ Windows 7 (32 and 64 bit), Mac 8.6 and higher, and Linux
  • Supports remote wake-up and power management
  • Frees your RS-232 ports for other uses or provides an RS232 connector for PCs without a serial port

USC Adapter Cable and Driver CD . . . . USC-FP-010    $16.90 USD 

 ZSA - ZigBee Serial Adapter

ZigBee RS232 Serial Adapter with integrated ZigBee core and radio/antenna circuits.
The ZS10 Serial Adapter is designed to meet specific requirements of low cost and low power wireless applications such as home automation and smart energy by adopting the ZigBee technology certified by ZigBee alliance based on ZigBee 2007 and ZigBee Pro standard. The ZS10 provides high performance and robust data transfer capability for wide range of applications.
  • Integrated 2.4GHz, IEEE 802.15.4-compliant coprocessor
  • Various antenna options according to users' requirement, up to 1.6km with optional 5 dBi dipole antenna
  • Supports RS232 serial communication with up to 115 kbps baud rate
  • Supports remote management features wirelessly such as firmware upgrade and system configuration by using modem AT command set
  • Enhanced portability: standard & extended battery pack
  • Easy to use Windows configuration tool available
  • Fully supports ZigBee 2007 / ZigBee Pro wireless connectivity
 
ZSA ZigBee Serial Adapter . . . . . ZSA-FP-010    $58.70 USD 

 ZUA - ZigBee USB Adapter

ZigBee USB adapter with integrated ZigBee core and radio/antenna circuits together with high level software library

The ZU10 USB Adapter is designed to meet specific requirements of low cost and low power wireless applications such as home automation and smart energy by adopting the ZigBee technology certified by ZigBee alliance based on ZigBee 2007 and ZigBee Pro standard. The ZU10 provides high performance and robust data transfer capability for wide range of applications

  • Fully supports ZigBee 2007 / ZigBee Pro wireless connectivity
  • Integrated 2.4GHz, IEEE 802.15.4-compliant coprocessor
  • Various antenna options according to users' requirement, up to 1.6km with optional 5 dBi dipole antenna
  • USB 2.0 interface
  • Supports remote management features wirelessly such as firmware upgrade and system configuration by using modem AT command set
  • Easy to use Windows configuration tool available
More Info
 
ZUA ZigBee USB Adapter . . . . .  ZUA-FP-010    $58.70 USD 
Copyright (c) 2011 Unistep Technologies.